Airfield Ground Lighting Explained: The Lights That Guide Every Night Landing

16-Nov-2026

When an aircraft descends towards a runway at night or in poor visibility, the pilot relies on a carefully engineered pattern of lights. AGL (Aeronautical Ground Lighting), also known as Airfield Ground Lighting, is the system that makes this possible. It is one of the most safety-critical systems in airport operations and maintenance, yet one that most passengers rarely notice.

What Is AGL (Aeronautical Ground Lighting)?

AGL is the network of lights, signs, cables, transformers and control systems that guides aircraft during approach, landing, taxiing and take-off. Every colour, spacing and brightness level follows established aviation standards, enabling pilots to interpret the same visual language across airports.

A well-designed airfield ground lighting system at an airport performs three essential functions:

  • Guides pilots onto the correct approach path
  • Defines runway and taxiway boundaries
  • Warns of holding positions, intersections and potential hazards

Key Components of Airport Runway Lighting Systems

1. Approach Lighting

Rows of high-intensity lights extend outward from the runway threshold, helping pilots align with the runway centreline and assess their approach as they descend.

2. Runway Edge, Threshold and End Lights

These lights clearly define the usable runway. Edge lights are typically white, threshold lights green and runway-end lights red, helping pilots identify where the runway begins and ends.

3. Runway Centreline and Touchdown Zone Lights

Embedded in the pavement, these lights guide aircraft during landing and take-off, particularly in low-visibility conditions.

4. Precision Approach Path Indicators (PAPI)

Red and white light units provide pilots with immediate visual guidance on whether the aircraft is above, below or on the correct approach path.

5. Taxiway Lighting and Signage

Taxiway centreline lights are green, while edge lights are blue. Illuminated signs indicate routes, holding positions and runway exits. Stop bars and runway guard lights provide additional protection against runway incursions.

6. Apron and Obstruction Lighting

Floodlights, high-mast lighting and obstruction lights support safe ground operations and help identify obstacles in and around the airfield.

How AGL Works Behind the Scenes

Most AGL circuits operate as series circuits. A Constant Current Regulator (CCR) supplies a controlled current through the circuit, while the required brightness level is selected according to operational conditions.

Each light fitting is connected through an isolating transformer. The characteristics of series transformers used in 6.6 A aeronautical ground lighting circuits are covered by IEC 61823. This arrangement helps maintain consistent light output across the circuit while limiting the impact of an individual lamp or fitting failure.

Airport Lighting Control and Monitoring Systems

Modern airports use sophisticated Airfield Lighting Control and Monitoring Systems (ALCMS) to manage AGL operations. These systems enable air traffic control and technical teams to:

  • Switch lighting circuits on or off and select brightness levels
  • Identify lamp, fitting and circuit faults
  • Configure lighting according to different runway operating conditions
  • Record system information for maintenance, analysis, audits and compliance

This is where industrial automation and control systems become an integral part of aviation safety. Integrating AGL with the wider airport automation solution, including energy and asset management systems, provides better visibility of system performance and supports more efficient airport operations.

Airport Lighting Maintenance and Operations: Why It Matters

AGL must perform reliably every night and in demanding weather and visibility conditions. A structured airport lighting maintenance and operations programme typically includes:

  • Photometric checks to verify that light output meets required performance levels
  • Cleaning, inspection and replacement of fittings and lenses affected by rubber deposits, dirt and weather
  • Cable insulation resistance testing and earth-fault detection
  • CCR servicing, spares management and rapid fault response
  • Documentation and maintenance records aligned with regulatory requirements

A dependable maintenance programme reduces the risk of unplanned outages, protects runway availability and supports the airport's broader safety and environmental management objectives.

LED Upgrades and Energy Efficiency

Airports are progressively replacing conventional lighting technologies with LED-based systems. LEDs consume less power, offer longer service life and require fewer replacements, helping reduce operating and maintenance costs while supporting airport environmental sustainability and green initiatives for airports.

In India, GMR Hyderabad International Airport has upgraded its airfield ground lighting signage from CFL to LED technology. Combined with an airport energy management system and regular airport energy auditing, LED-based AGL can contribute significantly to smarter and lower-carbon airport operations.

AGL in Airport Expansion and Renovation Projects

AGL is rarely a standalone activity. When an airport adds a runway, extends a taxiway or rehabilitates pavement, the associated lighting infrastructure must be designed, installed, tested and commissioned in coordination with the civil and electrical works.

Airport engineering services for AGL typically include:

  • Feasibility studies and lighting design
  • Airport cost estimation
  • Construction supervision during installation
  • Integration with airport electrical systems and airport MEP
  • Testing, commissioning and handover

Planning AGL early during airport expansion and airport renovation projects helps avoid rework, improves system integration and minimises disruption to ongoing operations.

AGL Within Complete Airport Systems

AGL operates alongside several other critical airport systems, including the Visual Docking Guidance System (VDGS), passenger boarding bridges, ground power units, fire detection and protection systems and HVAC.

An integrated airport infrastructure maintenance and development approach, supported by effective asset management for airports, enables operators to plan lifecycle costs, improve equipment reliability and optimise operating expenditure across these assets.

GMR Engineering & Management Services (GEMS) supports this integrated approach. Its airport asset O&M portfolio includes AGL alongside baggage handling systems, passenger boarding bridges, hold baggage screening systems, ground power units, HVAC, public health engineering and fire detection and protection systems. GEMS also provides AGL and airport electrical system design services to aviation consultants and airport authorities.

Why This Matters Now

Indian airports are adding runways, extending taxiways and expanding terminals to accommodate growing traffic. Every new runway or taxiway adds lighting circuits, control points and equipment that must be operated and maintained throughout their lifecycle.

As an airfield grows, managing AGL separately from the airport's wider electrical, automation and asset-management infrastructure can increase complexity and lifecycle costs. A coordinated approach to AGL design, maintenance, control and monitoring gives airport operators better visibility of asset health, enables faster fault response and establishes clear ownership when problems occur.

Ultimately, the objective is straightforward: pilots should have a runway and taxiway environment they can trust, whatever the weather or the hour.

“Airfield lighting is judged by what pilots never have to think about: a clear approach, a runway that is visible when they need it and a taxi route that is always clearly defined. That level of reliability comes from disciplined design, preventive maintenance and real-time monitoring, not from any single light or system.”

— Roy Sebastian, CEO, GEMS

What Good Looks Like

When AGL is managed well, it works almost unnoticed. Pilots see a runway environment that is clear and consistent in demanding conditions. ATC can change lighting configurations quickly. Maintenance teams identify faults before they affect operations and upgrades can be planned with minimal disruption to airport traffic.

That level of reliability comes from treating AGL as part of the wider airport systems ecosystem, with lighting, control, power, maintenance, asset management and energy efficiency planned together rather than as isolated systems.

For AGL – Aeronautical Ground Lighting operations, maintenance, control and monitoring, design and upgrades, contact:

Email: Rohitkumar.Singh@gmrgroup.in
Phone: +91 97171 99753